Transition Networks SGPOE1039-100 network media converter 100 Mbit/s

Quick Overview

AC powered PoE media converter
Enables enterprises to provide power to network devices over the existing CAT5 data connection.

Transition's AC powered PoE media converters combine data received over a fiber optic link with - 48VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD)over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE802.3af™: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input.

This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities (see switch section under specifications to the right).

In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. Also known as Powered Device Reset.

The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard as well as select legacy PD’s. The PoE converter is capable of inserting power on data pairs or spare pairs of the MDI.
SKU SGPOE1039-100-NA
EAN 0648177026906
Manufacturer Transition Networks
Reviews No
PDF Url No
Contract ID N/A
Weight & dimensions
Dimensions (WxDxH)4.41 x 5.08 x 0.984" (112 x 129 x 25 mm)
Weight31.7 oz (900 g)
Networking
Converter input interface100Base-TX
Networking standardsIEEE 802.3,IEEE 802.3af
Duplex systemFull,Half
Maximum data transfer rate100 Mbit/s
Design
CertificationEN55022:1994+A1:1996+A2:1997; FCC Part 15 Subpart B; UL 1950
Power
Power consumption (typical)20 W
External power adapterYes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-25 - 85 °C
Storage relative humidity (H-H)5 - 95%
Certificates
CertificationEN55022:1994+A1:1996+A2:1997; FCC Part 15 Subpart B; UL 1950
Other features
Power requirements90 – 250VAC external power supply; External AC/DC required; 48vdc 0.67A
Packet transfer speed1632 bytes
MAC address table8000 entries
Dimensions (WxDxH)4.41 x 5.08 x 0.984" (112 x 129 x 25 mm)