Transition Networks SGETF1024-110 network media converter 1000 Mbit/s 1300 nm Multi-mode Black

Quick Overview

1000BASE-T, RJ-45 to 1000BASE-SX, 1300nm, Extended MM, SC
Auto-Negotiation (802.3u) (Copper & Fiber)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.

Transparent Link Pass Through
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.

Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.

Remote Fault Detect

Remote Fault Detect (RFD) is a trouble shooting feature found on Gigabit Ethernet copper-to-fiber media converters. By enabling Remote Fault Detect on the remotely located media converter, the status of the fiber link will be monitored and any link failures will be reported back to the local converter. Should the remote converter lose its fiber RX signal, Remote Fault Detect will force the converter to shut down its fiber TX port. If Link Pass Though is enabled on both ends, then the copper ports will also be shut down to notify both end devices of the link failure.

- Enable Remote Fault Detect on the remote device
- Local end-device will be notified of remote fiber RX loss
SKU SGETF1024-110-NA
EAN 0648177003235
Manufacturer Transition Networks
Reviews No
PDF Url No
Contract ID N/A
Networking
Fiber optic connectorSC
Converter input interface1000Base-T
Converter output interface1000Base-SX
Maximum data transfer rate1000 Mbit/s
Technical details
Wavelength1300 nm
Maximum transfer distance78740.2" (2000 m)
Fiber mode structureMulti-mode
Fiber cable diameters supported (core/cladding)62.5/125 µm
Sensitivity-17 dBmW
Tx power (min)-10 dBmW
Tx power (max)-3 dBmW
Link budget7 dB
InternalNo
Weight & dimensions
Dimensions (WxDxH)3.23 x 4.8 x 0.984" (82 x 122 x 25 mm)
Package weight31.7 oz (900 g)
Ports & interfaces
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Fiber optic connectorSC
DC-in jackYes
Indication
LED indicatorsYes
Performance
Wavelength1300 nm
Maximum transfer distance78740.2" (2000 m)
Fiber mode structureMulti-mode
Fiber cable diameters supported (core/cladding)62.5/125 µm
Sensitivity-17 dBmW
Tx power (min)-10 dBmW
Tx power (max)-3 dBmW
Link budget7 dB
Design
LED indicatorsYes
Product colourBlack
CertificationFCC A, CISPR22/EN55022 A, EN55024, EN61000, CE
InternalNo
Power
Output voltage12 V
Output current0.8 A
External power adapterYes
Colour
Product colourBlack
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95%
Operating altitude0 - 118110.2" (0 - 3000 m)
Packaging data
Package weight31.7 oz (900 g)
Certificates
CertificationFCC A, CISPR22/EN55022 A, EN55024, EN61000, CE
Other features
Receive power-3.0 dBmW
Link budget7 dB
InterfaceRJ-45
Dimensions (WxDxH)3.23 x 4.8 x 0.984" (82 x 122 x 25 mm)