Omnitron iConverter 10FL/T network media converter 10 Mbit/s 850 nm Multi-mode Internal

Quick Overview

10BASE-T / 10BASE-FL, DF, MM, SC, 850 nm, 2 km, 10 dBm
10BASE-T to 10BASE-FL Managed Ethernet Media Converter

- The iConverter 10/FLT is an IEEE 802.3 compatible 10BASE-T UTP to 10BASE-FL fiber converter
- Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
- UTP port automatically supports Full or Half-Duplex 10Mbps Ethernet
- UTP crossover switch eliminates the need for a crossover cable
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support

The iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T UTP to 10BASE-FL fiber conversion.

The iConverter 10FL/T models are available with multimode, single-mode and single-fiber options. They support ST, SC, LC and MT-RJ connectors. The UTP port supports 10BASE-T in either Full or Half-Duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.

The 10FL/T features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter 10FL/T modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
SKU 8302-0
EAN 0800975016224
Manufacturer Omnitron
Reviews No
PDF Url No
Contract ID N/A
Networking
Fiber optic connectorSC
Cabling technology10BASE-FL, 10 BASE-T
Networking standardsIEEE 802.3
Duplex systemFull,Half
Maximum data transfer rate10 Mbit/s
Technical details
Wavelength850 nm
Maximum transfer distance78740.2" (2000 m)
Fiber mode structureMulti-mode
Hot-swapYes
InternalYes
Performance
Hot-swapYes
Wavelength850 nm
Maximum transfer distance78740.2" (2000 m)
Fiber mode structureMulti-mode
Mean time between failures (MTBF)830000 h
Weight & dimensions
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)
Weight8 oz (226.8 g)
Ports & interfaces
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Fiber optic connectorSC
Indication
LED indicatorsYes
Design
LED indicatorsYes
CertificationUL, CE, FCC Class A, NEBS 3 Level 3
InternalYes
Endurance
Mean time between failures (MTBF)830000 h
Power
Input current0.5 A
Management features
Hot-swapYes
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 80 °C
Operating relative humidity (H-H)5 - 95%
Operating altitude-3937 - 157480.3" (-100 - 4000 m)
Certificates
CertificationUL, CE, FCC Class A, NEBS 3 Level 3
Other features
Transmit power range-21 - -11 dBmW
Receive power-31 - -11 dBmW
Cabling technology10BASE-FL, 10 BASE-T
Power requirements3.3VDC
Full duplexYes
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)