Omnitron iConverter 10/100M network media converter 100 Mbit/s Single-mode Internal

Quick Overview

10/100BASE-T / 100BASE-X, SF, SM, SC, 1310/1550 nm, 20 km, 15 dBm
10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device

iConverter 10/100M modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter 10/100M2 web page.

- Carrier-Grade optical Ethernet Network Interface Device
- Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less 802.3ah management
- 802.3ah Link OAM for early fault detection and performance monitoring
- VLAN with Q-in-Q for E-Line and E-LAN services
- Quality of Service for Voice/Data/Video over Ethernet
- Bandwidth control (rate limiting)
- Port MIB statistics and optical performance statistics to support Service Level Agreements
- Port Access Control for enhanced security
- Configurable Link Fault Propagation modes
- Small Form Pluggable (SFP) transceivers with Optical Statistics for standard or CWDM applications
- Fixed-fiber connectors available for multimode and single-mode dual fiber and single-mode single-fiber
- UTP auto-crossover and auto-negotiation of data rate, duplex modes and pause capabilities
- Commercial (0 to 50ºC) and wide (-40º to 60ºC) temperature ranges
- MEF Certified Compliant
- NEBS Level 3 Compliant
- Lifetime Warranty and free 24/7 Technical Support

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 10/100M features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

The 10/100M is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable 10/100M plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The plug-in module can manage other modules in the same chassis and operate as a managed 10/100 media converter. It features two Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.

The standalone 10/100M is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The 10/100M standalone unit combines management capability with a compact chassis for deployment at the demarcation point.

Carrier-Grade Optical Ethernet

iConverter fiber access Network Interface Devices and media converters are MEF certified compliant and NEBS Level 3 compliant. iConverter NIDs enable Carrier-Grade Optical Ethernet with reliability and performance monitoring to support Service Level Agreements (SLAs).

The modular design of iConverter fiber access equipment future-proofs Metro Ethernet services with scalability of network services and lowers operating costs with comprehensive OAM management and provisioning.

Metro Ethernet Access

At the Central Office, the 10/100M plug-in module is installed in a managed iConverter 19-Module chassis for high-density fiber distribution from UTP switch equipment. At Customer Premises 1, the 10/100M plug-in module is installed in a 2-Module chassis with an iConverter 4TxVT four-port switch module. The two modules share data via the Ethernet Backplane. This configuration functions as a remotely managed demarcation switch with a fiber uplink port to the Central Office and five copper ports that drop off Ethernet service. At Customer Premises 2, the 10/100M standalone NID provides a fiber uplink to a single copper port for intelligent demarcation of Ethernet services.
SKU 8910-1
EAN 0800975021150
Manufacturer Omnitron
Reviews No
PDF Url No
Contract ID N/A
Fiber optic connectorSC
Cabling technology10BASE-T, 100BASE-TX, 100BASE-FX
Networking standardsIEEE 802.1p,IEEE 802.1Q,IEEE 802.3,IEEE 802.3ah
Maximum data transfer rate100 Mbit/s
Technical details
Maximum transfer distance787401.6" (20000 m)
Fiber mode structureSingle-mode
Fiber cable diameters supported (core/cladding)9/125 µm
Maximum transfer distance787401.6" (20000 m)
Fiber mode structureSingle-mode
Fiber cable diameters supported (core/cladding)9/125 µm
Mean time between failures (MTBF)600000 h
Weight & dimensions
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)
Weight8 oz (226.8 g)
Ports & interfaces
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Fiber optic connectorSC
LED indicatorsYes
LED indicatorsYes
CertificationUL, CE, FCC Class A, MEF 9
Mean time between failures (MTBF)600000 h
Input current1.0 A
External power adapterNo
Management features
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 80 °C
Operating relative humidity (H-H)5 - 95%
Operating altitude-3937 - 157480.3" (-100 - 4000 m)
CertificationUL, CE, FCC Class A, MEF 9
Other features
Transmit power range-15 - -5 dBmW
Receive power-30 - -3 dBmW
Cabling technology10BASE-T, 100BASE-TX, 100BASE-FX
Power requirements3.3VDC
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)