Omnitron iConverter 10/100 network media converter 100 Mbit/s Single-mode Internal

Quick Overview

10/100BASE-T / 100BASE-X, SF, SM, SC, RJ-45, 20 km, 15 dBm
10/100BASE-T UTP to 100BASE-X Ethernet Media Converter

- The iConverter 10/100 is an IEEE 802.3 compatible 10BASE-T UTP or 100BASE-TX to Fast Ethernet fiber converter
- Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
- UTP port with 10/100 automatically supports Half or Full-Duplex auto-negotiation with a manual crossover switch
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Wide Temperature models available with temperature range of -40 to +60º C
- Lifetime Warranty and free 24/7 Technical Support

The iConverter 10/100 managed media converters are members of the modular iConverter product family, and provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.

The iConverter 10/100 modules are available with multimode, single-mode and single-fiber options, and support ST, SC,
MT-RJ and LC connectors. The UTP port supports 10/100 and Half/Full-Duplex auto-negotiation with both hardware and software manual override. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment. The 10/100 also features two Ethernet Backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.

The 10/100 features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter 10/100 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
SKU 8390-1
EAN 0800975017290
Manufacturer Omnitron
Reviews No
PDF Url No
Contract ID N/A
Networking
Fiber optic connectorSC
Cabling technology100BASE-FX, 10BASE-T, 100BASE-TX
Networking standardsIEEE 802.3
Duplex systemFull,Half
Maximum data transfer rate100 Mbit/s
Technical details
Maximum transfer distance787401.6" (20000 m)
Fiber mode structureSingle-mode
Hot-swapYes
InternalYes
Performance
Hot-swapYes
Maximum transfer distance787401.6" (20000 m)
Fiber mode structureSingle-mode
Mean time between failures (MTBF)1050000 h
Weight & dimensions
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)
Weight8 oz (226.8 g)
Ports & interfaces
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Fiber optic connectorSC
Indication
LED indicatorsYes
Design
LED indicatorsYes
CertificationUL, CE, FCC Class A, NEBS Level 3
InternalYes
Endurance
Mean time between failures (MTBF)1050000 h
Power
Input current0.95 A
Management features
Hot-swapYes
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95%
Operating altitude-3937 - 157480.3" (-100 - 4000 m)
Certificates
CertificationUL, CE, FCC Class A, NEBS Level 3
Other features
Transmit power range-15 - -5 dBmW
Receive power-30 - -3 dBmW
Cabling technology100BASE-FX, 10BASE-T, 100BASE-TX
Power requirements3.3VDC
Dimensions (WxDxH)0.85 x 4.5 x 2.8" (21.6 x 114.3 x 71.1 mm)