Micron 5200 ECO 2.5" 1920 GB Serial ATA III

Quick Overview

SATA 6 Gb/s, Hot-plug, 6.35 cm (2.5") , RoHS, 1920 GB
Micron’s 5200 solid state drive (SSD) uses a single-chip controller with a SATA interface
on the system side and four channels of Micron NAND Flash internally. Available in the
2.5-inch form factor, the SSD integrates easily in existing storage infrastructures.
The SSD is designed to use the SATA interface efficiently during both READs and
WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced
boot times, faster application load times, reduced power consumption and extended
reliability.
The self-encrypting drive (SED) features an AES-256 encryption engine, providing hardware-based,
secure data encryption, with no loss of SSD performance. This SED follows
the TCG Enterprise specification for trusted peripherals. When TCG Enterprise features
are not enabled, the device can perform alternate data encryption by invoking the ATA
security command set encryption features, to provide full disk encryption (FDE) managed
in the host system BIOS. TCG Enterprise and ATA security feature sets cannot be
enabled simultaneously.
The data encryption is always running; however, encryption keys are not managed and
the data is not secure until either TCG Enterprise or ATA security feature sets are enabled.
SKU MTFDDAK1T9TDC-1AT1ZA
EAN 0649528785701
Manufacturer Micron
Reviews No
PDF Url No
Contract ID N/A
Hard drive
SSD capacity1920 GB
Bytes per sector512
Data transmission
Random write (4KB)22000 IOPS
Random read (4KB)95000 IOPS
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
Endurance
Mean time between failures (MTBF)3000000 h
Performance
InterfaceSerial ATA III
Component forPC/notebook
End-to-End Data ProtectionYes
Hot-swapYes
SSD capacity1920 GB
Bytes per sector512
Random write (4KB)22000 IOPS
Random read (4KB)95000 IOPS
Mean time between failures (MTBF)3000000 h
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
Design
Component forPC/notebook
SSD form factor2.5"
Features
InterfaceSerial ATA III
Component forPC/notebook
End-to-End Data ProtectionYes
Hot-swapYes
SSD capacity1920 GB
Bytes per sector512
Random write (4KB)22000 IOPS
Random read (4KB)95000 IOPS
Mean time between failures (MTBF)3000000 h
Write latency300 µs
Read latency200 µs
Data transfer rate6 Gbit/s
SSD form factor2.5"
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Non-operating shock15000 G
Technical details
InterfaceSerial ATA III
Hot-swapYes
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Non-operating shock15000 G
SSD form factor2.5"
Weight & dimensions
Package width2.75" (69.8 mm)
Package depth3.95" (100.5 mm)
Package height0.276" (7 mm)
Weight2.47 oz (70 g)
Packaging data
Package width2.75" (69.8 mm)
Package depth3.95" (100.5 mm)
Package height0.276" (7 mm)