Allied Telesis AT-IMC200TP/SC-980 network media converter 100 Mbit/s 1310 nm Grey

Quick Overview

TAA, 10/100TX POE+ to 100FX/SC Industrial Temp Fast Ethernet Media Converter
10/100/1000T to 100FX/SC Industrial temperature PoE+ media converter. These converters support 802.3at, PoE+, 30W, LTPoE++ and 4-pair up to 70W. The IMC200TP/SC-980 features Remote Power Cycle and Smart MissingLink™ (SML) and is fanless for silent operation.

Powering remote devices
Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.

The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.

Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.

In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.

Remote Power Cycle
The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.

Jumbo frame support
Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.

Smart MissingLink™ (SML)
The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.

- Converts speed as well as media type
- Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W
- Supplies up to 70W of PoE power
- Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)
- Auto MDI/MDI-X
- Smart Missing Link (SML)
- Supports up to 10K jumbo frames
- Supports multi-mode fiber
- 4K MAC address table
- Store-and-forward switching mode
- Transparent to IEEE 802.1Q packets
- Standalone or DIN rail mount
- Fanless for silent operation
SKU AT-IMC200TP/SC-980
EAN 0767035210537
Manufacturer Allied Telesis
Reviews No
PDF Url http://objects.icecat.biz/objects/mmo_66925984_1570623367_5186_18532.pdf
Contract ID N/A
Networking
Fiber optic connectorSC
Jumbo frames supportYes
Store-and-forwardYes
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (1 Gbps)1488000 pps
Auto-negotiationYes
Jumbo frames10000
VLAN supportYes
Converter input interface10Base-T,100Base-T,1000Base-T
Ethernet LAN data rates10,100 Mbit/s
Ethernet interface typeFast Ethernet
Converter output interface100Base-FX
Auto MDI/MDI-XYes
Maximum data transfer rate100 Mbit/s
Technical details
International Protection (IP) codeIP30
Wavelength1310 nm
Maximum transfer distance78740.2" (2000 m)
Tx power (min)-19 dBmW
Tx power (max)-14 dBmW
Rx power (min)-32 dBmW
Rx power (max)-3 dBmW
InternalNo
Performance
Jumbo frames supportYes
Store-and-forwardYes
Auto-negotiationYes
Wavelength1310 nm
Maximum transfer distance78740.2" (2000 m)
Tx power (min)-19 dBmW
Tx power (max)-14 dBmW
Rx power (min)-32 dBmW
Rx power (max)-3 dBmW
Ports & interfaces
Power over Ethernet plus (PoE+) ports quantity1
Connectivity technologyWired
Fiber ports quantity1
Fiber optic connectorSC
Indication
LED indicatorsYes
Design
DIN rail mountingYes
International Protection (IP) codeIP30
RoHS complianceYes
SafetyUL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
LED indicatorsYes
Product colourGrey
CertificationTAA
EMI/Emission & Stability
FCC Class A
EN55024 (immunity standard)
EN55032 Class A
EN55035
VCCI Class A
InternalNo
Power
Power over Ethernet (PoE)Yes
Colour
Product colourGrey
Weight & dimensions
Width4.37" (111 mm)
Depth3.78" (96 mm)
Weight26.4 oz (748 g)
Height1.38" (35 mm)
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Storage relative humidity (H-H)5 - 95%
Operating altitude0 - 120000" (0 - 3048 m)
Certificates
RoHS complianceYes
SafetyUL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
CertificationTAA
EMI/Emission & Stability
FCC Class A
EN55024 (immunity standard)
EN55032 Class A
EN55035
VCCI Class A